SICK Flexi Soft, Руководство по эксплуатации, Страница: 121 / 200

Operating Instructions Chapter 6
Flexi Soft Gateways
8012664/XB29/2013-06-11 © SICK AG • Industrial Safety Systems • Germany • All rights reserved
121
Subject to change without notice
Fieldbus gateways
Data block 1 Data block 2 Data block 3 Data block 4 Data block 5
Input data Input data Input data Input data Input data
Byte 0
Input values
module 1
Output values
module 1
Logic result 0 Not assigned Not assigned
Byte 1
Input values
module 2
Output values
module 2
Logic result 1 Not assigned Not assigned
Byte 2
Input values
module 3
Output values
module 3
Logic result 2 Not assigned
Byte 3
Input values
module 4
Output values
module 4
Logic result 3 Not assigned
Byte 4
Input values
module 5
Output values
module 5
Gateway direct
output values 0
Not assigned
Byte 5
Input values
module 6
Output values
module 6
Gateway direct
output values 1
Not assigned
Byte 6
Input values
module 7
Output values
module 7
Gateway direct
output values 2
Not assigned
Byte 7
Input values
module 8
Output values
module 8
Gateway direct
output values 3
Not assigned
Byte 8
Input values
module 9
Output values
module 9
Not assigned Not assigned
Byte 9
Input values
module 10
Output values
module 10
Not assigned Not assigned
Byte 10
Input values
module 11
Output values
module 11
Not assigned Not assigned
Byte 11
Input values
module 12
Output values
module 12
Not assigned Not assigned
Not available
Length 12 bytes 12 bytes 12 bytes 12 bytes 2 bytes
For detailed information about the content of the process image please see section 3.3
“Data transmitted into the network (input data sets)” on page 14.
How to set the start address for the data blocks:
Open the Flexi Soft Designer and load the hardware configuration including the
PROFIBUS DP gateway. Ensure your project is offline.
Click on the
Gateways button above the main window and select the FX0-GPRO or
double click the FX0-GPRO in the hardware configuration view to open the gateway
configuration dialog.
Click on
Gateway configuration on the left hand menu. The following dialog appears:
Tab. 89: Default content of
input data block 1-5 of the
FX0
> GPRO