Sharp MX-M6570, Руководство пользователя

Страница: 331 / 935

2-112
COPIER ► OTHER FUNCTIONS
Not copied 2-sided copy
Inserts a front cover at the beginning of copies, and makes a 2-sided copy on the fifth
and sixth original pages for back cover.
1-sided copy 1-sided copy
Makes a 1-sided copy on the first original page for front cover, and also makes a
1-sided copy on the sixth original page for back cover. The second and the fifth
original pages are not copied.
1-sided copy 2-sided copy
Makes a 1-sided copy on the first original page for front cover, and also makes a
2-sided copy on the fifth and sixth original pages for back cover.
* The second original page is not copied.
2-sided copy 1-sided copy
Makes a 2-sided copy on the first and second original pages for front cover, and also
makes a 1-sided copy on the sixth original page for back cover.
* The fifth original page is not copied.
2-sided copy 2-sided copy
Makes a 2-sided copy on the first and second original pages for front cover, and also
makes a 2-sided copy on the fifth and sixth original pages for back cover.
• Before using the covers/inserts function, load insertion sheets in the tray.
• When selecting the covers/inserts function, place the originals in the document feeder tray, select 1-sided or 2-sided
copying, and select the number of copies and any other desired copy settings. When these settings have been completed,
perform the procedure to select covers/inserts.
• One sheet can be inserted for each of front and back covers.
• The document glass is not available for this function.
• When performing 2-sided copying of 2-sided originals, an insertion sheet cannot be inserted between the front and reverse
sides of an original.
• This function cannot be used in combination with the saddle stitch function.
• This setting is not available when the "Covers/Inserts" is disabled in "Settings".
Disabling of Covers/Inserts Mode
Disables the use of the covers and inserts function.
In "Settings (administrator)", select [System Settings]
→ [Common Settings] → [Operation Settings] → [Condition Settings]
→ [Disabling of Covers/Inserts Mode].
Setting conditions for each cover
Resulting copies
Front Cover Back Cover
3
4
1
2 6
5
3
4
1
6
3
4
1
6
5
3
4 6
1
2
3
4
1
2 6
5