Sharp AR-BC320 Скачать руководство пользователя страница 29

Страница: 29 / 344

AR-BC320 UNPACKING AND INSTALLATION 5 - 7

14. Setup and adjustment data recording

Print the various setup data and the adjustment data (list) with
SIM22-6 and keep the data.

In case of a memory trouble, if the data are not kept, all the adjust-
ments must be made again.

If the data are kept, the setup values and the adjustment values
can be entered without adjustments, shortening the servicing time.

15. Necessary works before moving the

machine

1) If the following options are installed, remove all of them from

the machine.

• Sorter

• Finisher

• Reverse unit

• RADF unit

• Desk unit

2) Remove the following consumable parts from the machine.

• Paper

• Toner cartridge

• Photoconductor cartridge

3) Lock the following sections.

• Scanner (Optical section)

• Paper cassette lift plate

RADF
operation/
Duplex copy
operation

S-S mode

When the RADF is installed.

D-S mode

When the RADF is installed.

S-D mode

When the
RADF is
installed.

When the desk
unit with the
duplex unit is
installed.

D-D mode

When the
RADF is
installed.

When the desk
unit with the
duplex unit is
installed.

Bookbinding operation

When the finisher is installed.

Stapling operation

When the finisher is installed.

Grouping operation

When the
finisher is
installed.

When the
sorter is
installed.

Sorting operation

When the
finisher is
installed.

When the
sorter is
installed.

Check item

Installation

Содержание AR-BC320

























































































































































































































































































































































Результаты поиска

Содержание AR-BC320

Отзывы:

Sharp AR-BC320, Руководство по обслуживанию, Страница: 29 / 344

Результаты поиска

Содержание AR-BC320

Отзывы: