Sharp AR-BC320, Руководство по обслуживанию, Страница: 229 / 344

AR-BC320 SIMULATION 9 - 75
(Items to be set)
3. Press [OK] key to set.
4. Press [EXECUTE] key to send pulses (dial set with SIM 66-13)
from the line at each setting of the high group and the low
group of the send level.
(Adjustable items)
This function is enabled only when the AR-MM9 is installed. It is
used when the ICU PWB SRAM data must be backed up in case
of repair of the ICU PWB, etc.
2. Press [Yes] key to write the Flash ROM (AR-MM9) data into
the ICU PWB SRAM.
This function is enabled only when the AR-MM9 is installed. It is
used to restore the backup data of the AR-MM9 to the ICU PWB
SRAM after completion of repair of the ICU PWB.
Operation/
Procedure 1. Enter the make time to be set with the 10-key.
2. Press [OK] key to set.
3. Press [EXECUTE] key to send the pulse (dial set
with SIM 66-13).
Item Set range Default
A Make time 0 – 15 8
66 -16
Purpose Adjustment
Function
(Purpose) Used to adjust and check the send level of DTFM
signal. (When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure 1. Select an item to be adjusted with the scroll key.
2. Enter the set value with the 10-key.
Item Set range Default
A Level (db) 0 – 15 5
B Difference between the high
and the low groups 0 – 15 1
66 -17
Purpose Operation test/check
Function
(Purpose) Used to select the DTFM signal (1 – 9, 0, *, #) to
send it to the line and the speaker (at the max.
level). (When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure 1. Select the DTFM signal (1 – 9, 0, *, #) to be sent.
2. Press the [EXECUTE] key.
66 -18
Purpose Operation test/check
Function
(Purpose) Used to select the DTFM signal (1 – 9, 0, *, #) to
send it to the line and the speaker (Level: soft SW
setting). (When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure 1. Select the DTFM signal (1 – 9, 0, *, #) to be sent.
2. Press the [EXECUTE] key.
66 -19
Purpose Backup
Function
(Purpose) Used to write the ICU PWB SRAM contents (various
set values and user data) into the Flash ROM
(AR-MM9). (When the FAX is installed.)
Section FAX
Item Data
Operation/
Procedure 1. Press the [EXECUTE] key. (YES/NO key
display)
2. Press [Yes] key to write the ICU PWB SRAM
data into the Flash ROM (AR-MM9).
66 -20
Purpose Backup
Function
(Purpose) Used to write the Flash ROM (AR-MM9) contents
(SRAM contents written with SIM 66-19) into the ICU
PWB SRAM. (When the FAX is installed.)
Section FAX
Item Data
Operation/
Procedure 1. Press the [EXECUTE] key. (YES/NO key
display)