Sharp AR-BC320 Скачать руководство пользователя страница 104

Страница: 104 / 344

AR-BC320 DESCRIPTIONS OF EACH SECTION 7 - 63

3) Detach the connector.

4) Remove the screws and E-ring, and remove (B) the front open

sensor.

b-3. Document feed cover open sensor and document feed

cover open SW disassembly

1) Remove the screws, and detach the connectors.

2) Remove (A) the document feed cover open sensor and (B) the

document feed cover open SW.

b-4. Document feed motor disassembly

1) Remove the screws.

2) Remove (A) the document feed drive unit.

3) Remove the screws.

4) Remove (B) the document feed motor.

b-5. Document feed drive unit disassembly

1) Remove the screws.

2) Remove (A) the document feed drive unit.

b-6. Resist roller disassembly

1) Remove the E-rings, gear and bearing.

2) Remove the E-rings, spring and bearing.

Содержание AR-BC320

























































































































































































































































































































































Результаты поиска

Содержание AR-BC320

Отзывы:

Sharp AR-BC320, Руководство по обслуживанию, Страница: 104 / 344

Результаты поиска

Содержание AR-BC320

Отзывы: