Sharp AR-650, Руководство по обслуживанию, Страница: 56 / 200

1 - 49 ADJUSTMENT
(d) Scanner secondary scanning deviation
(1) Set the top margin adjustment value to 0 (zero).
1
→
[430]
→
[START]
→
Enter 0 by digital keys
→
[SET] or [INT]
→
1
(2) Place the scale on the original glass and make an A4/LT 400% test copy from LCF.
* Press the leading edge of the scale against the original scale on the leading edge side.
(3) Follow the procedure below to adjust so that the scale on the copied paper starts from the 2 mm
± 0.5 mm position.
1
→
[305]
→
[START]
→
Adjust by digital keys
→
[SET] or [INT]
→
[E/S]
→
1
(Test copy)
*When the value increases, the image moves to the leading edge (in increments of 0.22 mm/
STEP).
Notes: 1. Before making a test copy, make sure that [100% A] is appeared on the top of the
message display unit after the [SET] icon or the [INT] key is pressed, and then make
a test copy.
2. The effective adjustment value is within the range 0 to 255. The default adjustment
value is 128.
10 20 30 2
Copied scale
Copy movement direction