Sharp AR-650, Руководство по обслуживанию, Страница: 38 / 200

1 - 31 ADJUSTMENT
626 Bypass feed paper size Copier All 1 0-1 1
recognition
636 Image shift copying width All 0 0-1 1
setting singly (linkage of
front side and back side)
638 Paper size change in Copier All 2 0-2 1
drawer or LCC enable
639 Date and Time display Copier All 0 0-1 1
640 Date format Copier All 0: Japan 0-2 1
1: Europe
2: UC,
Others
641 Automatic sorting mode from Copier All 2 0-3 1
the RADF.
642 Finisher mode priority Copier All 0 0-3 1
selection at power on.
645 Reproduction ratio in the Copier All 10 0-10 1
editing mode.
646 2 on 1 and 4 on 1 placement Copier All 0 0-1 1
of images.
648 Finisher tray reset All 0 0-1 1
649 Magazine sort Copier All 0 0-1 1
650 2 on 1 and 4 on 1 order of Copier All 0 0-1 1
image placement.
651 Page Numbering Copier All 0 0-3 1
652 Cascade operation setting Copier 0 0-1 1
653 Cascade operation setting Printer 0 0-1 1
657 Annotation default direction Copier All 0 0-1 1
when the power is turned on.
658 Restart setting when Printer 0 0-1 1
supplying paper during the
bypass feeding job.
680 SCSI ID setting. DSS 0 0-15 1
681 Tandem copy setting DSS 0 0-1 1
682 Language DSS — 0 0-1 1
supported by controller
690 HDD formatting (Hard Disk All — — 2-4 1
Drive).
Perform the formatting when
the HDD is replaced or the
data has been corrupted.
691 HDD Type display All — — 0-3 2
08 MODE
IMAGE
ALLOWABLE
PROCE-
CODE NAME MODE DEFAULT INPUT CONTENTS
DURE
MODE
VALUES GROUP
0: Disabled
1: Enabled
0: Enabled
1: Disabled
0: All menu operations allowed
1: All menu operations prohibited
2: Sheet cassette selectable
0: Disabled 1: Enabled
0: 1999.10.16
1: 16.10.1999
2: 10.16.1999
0: OFF 1: STAPLE 2: SORT 3: STACK
0: NON SORT 1: STAPLE 2: SORT 3: STACK
0: 90% 3: 93% 6: 96% 9: 99%
1: 91% 4: 94% 7: 97% 10: 100%
2: 92% 5: 95% 8: 98%
0: Horizontally centers the 2 on 1 images.
1: Vertically centers 4 on 1 images.
0: Disabled
1: Enabled
0: Opening from the front of the book.
1: Opening from the rear of the book.
0: Forward image placement
1: Reverse image placement
Hyphen White area provided on black
Solids for number
0: OFF OFF
1: ON OFF
2: OFF ON
3: ON ON
hyphen = -1-
Example of Hyphen and White area
0: OFF 1: ON
0: OFF 1: ON
0: Short edge
1: Long edge
0: Disabled
1: Enabled
0: Disabled 1: Enabled
0: Enabled
1: Disabled
(English fixing)
2: DSI Type formatted.
The power switch must be turned OFF/ON after
the “WAIT” message is no longer displayed.
3: Tandem type formatted.
4: Only Tamdem area formatted.
0 : Not formatted.
1 : Not used.
2 : DSI Type formatted.
3 : Tandem type formatted.
This item is added from the 8070.
Power must be turned OFF after "WAIT" is cleared.