Sharp AR-650, Руководство по обслуживанию, Страница: 39 / 200

ADJUSTMENT 1 - 32
692 HDD size display All — — 2
800 Toner adhesion amount All 0 0-16 1
sensor error count/clear
802 Image quality maintenance All 0 0-1 1
control ON/OFF
803 Image quality maintenance All 2 0-30 1
control startup count setting
805 Test pattern data-1 setting All 88 0-255 1
814 Toner adhesion amount All 97 0-255 1
sensor abnormal value
900 Displays the System FLASH All — — — 2
ROM version for all 6
programs data.
903 Displays the Main Logic All — — — 2
EPROM version
904 Displays the Laser Logic All — — — 2
EPROM version
905 Displays the Scanner Logic All — — — 2
EPROM version
921 Displays the System Logic All — — —
FLASH ROM program data
version.
922 Displays the System Logic All — — —
FLASH ROM Fixed UI (User
interface) data fixed area
version.
923 Displays the System Logic All — — —
FLASH ROM
Common UI (User interface)
data common area version.
924 Displays the System Logic All — — —
FLASH ROM 1st language UI
(User interface) data version.
925 Displays the System Logic All — — —
FLASH ROM 2nd language UI
(User interface) data version.
926 Displays the System Logic All — — —
FLASH ROM 3rd language UI
(User interface) data version.
Supplementary:
(1) Mode "08-203"
When the K-SRAM as a service part is installed, the setting mode "08-203" must be changed at "0".
When it is set at "1" the copier may not be able to operate.
(2) Mode "08-449"
Due to the error of an optical component such as the galvanomirror or an error caused by the passing
time of the housing, if the beam positioning adjustment is not finished correctly, an temporary coun-
termeasure will be brought about and a mode in which printing can continue to operate be applied. (if
the HSYNK is not taken, printing is impossible).
If there is an error in the galvanomirror, then correction control is not performed and "Service Call" is
displayed so the copier stops. When image deterioration is allowable, copier can be used without any
judgement as to whether adjustment has been finished or not. This can continue until a replacement
unit is available and service technician can use this mode for that purpose.
(3) Mode "08-658"
If paper runs out during printing with the bypass, "automatic start or not" is set after paper has been
added to the bypass.
(4) Mode "08-202"
Function Clear when there is no key copy counter. When the key copy counter or the card is pulled
out, all the setting contents will be cleared. Only when the setting value of 08/202 is 2 or 3, this
function is effective.
08 MODE
IMAGE
ALLOWABLE
PROCE-
CODE NAME MODE DEFAULT INPUT CONTENTS
DURE
MODE
VALUES GROUP
X.X GB
0: ON 1: OFF
JPN : S330SJXXXX
UC : S330SUXXXX
EU : S330SEXXXX
Others: S330SXXXX
33*M-XXX
300L-XXX
300S-XXX
VXXX.XXX
Example : V006.148 U
VXXX.XXX
Example : V006.000 0
VXXX.XXX
Example : V005.000 0
VXXX.XXX
Example : V010.001 3
VXXX.XXX
Example : V006.000 0
VXXX.XXX
Example : V004.001 11