SEW MOVITRAC 31 series, Руководство пользователя

Страница: 51 / 78

With the exception of Error Class 8 = Other Error, the error class is generated by the fieldbus pcb
communications software if communication is faulty. All return codes supplied by the inverter system
come under
Error Class 8 = Other Error. A more detailed breakdown of the error is obtained from the
Additional Code element.
5.5.2 Error Code
The Error Code element provides a more detailed analysis of the cause of the error within the error
class. The error code is described in DIN 19245 Part 2 (Section 3.16.1.4.4). The error code is
generated by the fieldbus pcb communications software if communication is faulty. In the case of
Error Class 8 = Other Error, only Error Code = 0 (Other Error Code) is defined, with a detailed
breakdown provided in
Additional Code.
5.5.3 Additional Code
The Additional Code contains the SEW-specific return codes for faulty inverter parameter adjustment.
They are returned to the master under
Error Class 8 = Other Error.
Add. code
high (hex) Add. code
low (hex)
Meaning
00 10 Illegal parameter index
00 11 Function/parameter not implemented
00 12 Access is read only
00 13 Parameter lock active (P800)
00 14 Factory setting active (P830)
00 15 Parameter value too large
00 16 Parameter value too small
00 17 Necessary option pcb for this function/parameter not installed
00 18 Error in system software
00 19 Parameter access via this serial interface not permitted
00 1A Speed control active (P770)
00 1B Unauthorized access
00 1C Output stage not disabled
00 1D Invalid parameter value (e.g. invalid intermediate value)
00 1E Factory setting started
00 22 4Q-operation 1 (P890) required, e.g. for hoist function 1 (P710)
00 23 4Q-operation 2 (P891) required, e.g. for hoist function 2 (P712)
00 24 DC braking 1 active (P730), modification not possible
00 25 DC braking 2 active (P733), modification not possible
00 26 Hoist function set 1 active (P710), modification not possible
00 27 Hoist function set 1 active (P730), modification not possible
00 28 Parameter not memory-resident; lost in case of power down
00 29 Parameter access via this serial interface not permitted
00 2A Speed control not active (P770)
00 2B Controller inhibit required
00 2C Motor size-up 1 (P328) and rapid start 1 (P720) cannot be activated at the same time
00 2D Motor size-up 2 (P348) and rapid start 2 (P723) cannot be activated at the same time
00 2E Necessary option pcb for this function/parameter not installed
00 2F 4Q-operation 1 (P890) and DC braking 1 (P730) cannot be activated at the same time
00 30 4Q-operation 2 (P891) and DC braking 2 (P733) cannot be activated at the same time
00 31 Controller inhibit active, modification not possible
00 32 Synchronous operation not active (P760)
00 33 Synchronous operation: MOVITRAC is slave (P761)
00 34 Invalid parameter frame type
5 Setting Inverter Parameters
MOVITRAC
®
31.. Fieldbus Unit Profile
51
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com