SEW-Eurodrive MOVIFIT compact, Руководство по эксплуатации, Страница: 89 / 120

8
Service
MOVIFIT® compact error list
Operating Instructions – MOVIFIT
®
compact
89
8.2.2 Error list for MOVIFIT
®
compact motor starter
Code Subcode Meaning Possible cause Measure
F 01 3 Overcurrent at motor ter-
minal X9
(Reversing starter/dual-mo-
tor starter, motor 1)
Short circuit at
starter output
• Check the connection between the
starter output and the motor.
• Check the motor winding for short
circuiting.
Sudden overload
of motor
• Check motor shaft for blocking.
4 Overcurrent at motor ter-
minal X8
(Dual-motor starter, motor
2)
Short circuit at
starter output
• Check the connection between the
starter output and the motor.
• Check the motor winding for short
circuiting.
Sudden overload
of motor
• Check motor shaft for blocking.
F 06 1, 2 Phase failure during initial-
ization Failure of one or
more line phases • Check the supply system cable for
phase failure.
Motors not con-
nected correctly
• Check whether the motors are con-
nected correctly.
F 18 13, 103 CPU error - • Reset the error.
• If the error persists, contact SEW-
EURODRIVE Service.
F 25 0, 5, 7, 8,
203 EEPROM error - • Load the factory settings and re-
parametrize the device.
F 34 1 Start time monitoring error
(Reversing starter / dual-
motor starter, motor 1)
Insufficient accel-
eration power
Too much load
• Check the motor phases. Reduce the
load.
2 Start time monitoring error
(Dual-motor starter, motor
2)
Insufficient accel-
eration power
Too much load
• Check the motor phases. Reduce the
load.
F 36 0 MBBG11A timeout error MBBG11A dis-
connected during
manual opera-
tion. • Plug in the plug connector of the MB-
BG11A operator panel again.
• Reset the error.
F 37 0 Starter software run-time
error • Contact SEW‑EURODRIVE Service.
F 43 0 Internal communication
error Communication
problem between
internal control
section and
power section.
• Contact SEW‑EURODRIVE Service.
F 44 100 Device overload (I
2
t) Device overload
(I
2
t)
• Reduce the drive load.
• Avoid enabling both drives at the
same time.
F 45 17, 20 Initialization error,
power section assignment Internal power
section not com-
patible • Contact SEW‑EURODRIVE Service.
22527060/EN – 08/2017