manualshive.com logo in svg

SEW-Eurodrive MOVIFIT compact, Руководство по эксплуатации, Страница: 25 / 120

Поделиться
Скачать
SEW-Eurodrive MOVIFIT compact Скачать руководство пользователя страница 25

5

Electrical installation

Power bus connection (line cable)

Operating Instructions – MOVIFIT

®

 compact

25

5.5

Power bus connection (line cable)

 WARNING

Electric shock due to dangerous voltages in the ABOX.

Severe or fatal injuries.

•

De-energize  the  MOVIFIT

®

  device.  Observe  the  minimum  switch-off  time  after

disconnection from the supply system:

–

1 minute

 WARNING

Electric shock due to connecting or disconnecting plug connectors when voltage is
applied.

Severe or fatal injuries.

•

Disconnect all supply voltages.

•

Make sure that the device is de-energized.

•

Never plug or unplug the plug connectors while they are energized.

 WARNING

Danger of burns due to hot surfaces of the device (e.g. the heat sink).

Serious injuries.

•

Do not touch the device until it has cooled down sufficiently.

Connect the MOVIFIT

®

 compact device to the power bus as follows.

1. Loosen the 4 screws and remove the EBOX from the ABOX.

X22

X23

X50

DI02

AS-I Status

DI03

Diagnose

STATU

S

AS-Interface

X21

16938773771

22527060/EN – 08/2017

Содержание MOVIFIT compact

























































































































Отзывы:

Нет отзывов