SELVA MARINE Fin Whale 225 EFI, Руководство по обслуживанию

Страница: 303 / 399

6AL3J11
7-54
1
2
3
4
5
6
7
8
9
2. Fill the trim cylinders with the recom-
mended fluid to the correct level
b
as
shown.
3. Install the trim ram assemblies into the
trim cylinders, and then tighten the trim
cylinder end screws
2
to the specified
torque.
WARNING
Do not push the trim rams down while
installing them into the trim cylinders.
Otherwise, the PTT fluid may spurt out
from the unit.
Installing the PTT motor
CAUTION:
Do not use a rag when assembling the
PTT unit as dust and particles on the PTT
unit components can lead to poor perfor-
mance.
1. Install the joint
1
into the gear pump.
2. Fill the pump housing with the recom-
mended fluid to the correct level
a
as
shown.
Recommended PTT fluid:
ATF Dexron II
Cylinder-end screw wrench:
90890-06568
T
R
.
.
Trim cylinder end screw
2
:
160 N · m (16.0 kgf · m, 118.0 ft · lb)
Recommended PTT fluid:
ATF Dexron II
Tilt cylinder and trim cylinder