SELVA MARINE Fin Whale 225 EFI, Руководство по обслуживанию

Страница: 130 / 399

POWR
Power unit
5-29
6AL3J11
12. Hold the intake camshaft using a wrench,
and then tighten the variable camshaft
timing bolt
6
to the specified torque.
CAUTION:
• Do not hold the driven sprocket when
tightening the variable camshaft timing
bolt. Otherwise the variable camshaft
timing assembly could be damaged.
• Do not turn the intake camshaft when
tightening the variable camshaft timing
bolt. Otherwise the intake and exhaust
valves will collide with each other and
be damaged.
NOTE:
Slight turn the driven sprockets in direction
Ê
to remove any free play
Ë
before tightening
the variable camshaft timing bolt
6
.
13. Install a new gasket
7
and the variable
camshaft timing cap
8
, and then tighten
the cap to the specified torque while
holding the driven sprocket using the
special service tool.
CAUTION:
• Do not reuse the gaskets
7
, always
replace them with new ones.
• Do not hold the camshaft when tighten-
ing the variable camshaft timing cap.
Otherwise the variable camshaft timing
assembly could be damaged.
• Do not turn the driven sprocket when
tightening the variable camshaft timing
cap. Otherwise the intake and exhaust
valves will collide with each other and
be damaged.
14. Align the “ II ” marks
b
on the port driven
sprockets by turning them counterclock-
wise 60
° gradually.
S6AL5G70
Ê
Ë
Ë
Ê
PORT
STBD
S6AL5A90
6
6
E
T
R
.
.
Variable camshaft timing bolt
6
:
60 N · m (6.0 kgf · m, 44.3 ft · lb)
Sheave holder: 90890-01701
T
R
.
.
Variable camshaft timing cap
8
:
32 N · m (3.2 kgf · m, 23.6 ft · lb)
8 8
S6AL5B00
7