SELVA MARINE Fin Whale 225 EFI, Руководство по обслуживанию

Страница: 236 / 399

LOWR
Lower unit
6-51
6AL3J11
3. Install the dowels
1
into the lower unit.
4. Install the lower unit into the upper case,
and then tighten the lower case mounting
bolts
2
to the specified torque.
5. Install the trim tab
3
to its original posi-
tion, and then tighten the bolt
4
to the
specified torque.
6. Install the propeller and propeller nut,
and then tighten the nut temporarily.
Place a block of wood between the anti-
cavitation plate and propeller to keep the
propeller from turning, and then tighten
the nut to the specified torque.
WARNING
• Do not hold the propeller with your
hands when loosening or tightening it.
• Be sure to disconnect the battery cables
from the battery and the clip from the
engine stop lanyard switch.
• Put a block of wood between the anti-
cavitation plate and propeller to keep
the propeller from turning.
NOTE:
If the grooves in the propeller nut
5
do not
align with the cotter pin hole, tighten the nut
until they are aligned.
T
R
.
.
Lower case mounting bolt
2
:
47 N · m (4.7 kgf · m, 34.7 ft · lb)
Trim tab bolt
4
:
42 N · m (4.2 kgf · m, 31.0 ft · lb)
T
R
.
.
Propeller nut
5
:
54 N · m (5.4 kgf · m, 39.8 ft · lb)