94
3) Pull the other end of the camera to remove some of the extra slack, leaving about 1” of cable
bend as shown below. It is normal for thin layer of cable sheathing to be scratched off during this
procedure.
4) Attach the Flash Link adapter onto the top of the diffuser (A). Then push down on the bottom of
the adapter (B) until it locks into the diffuser.
Note:
Above diagram shows side view of adapter without optical cable for clearer description.
How to replace the housing O-ring
Replace O-ring or have waterproof housing serviced if the O-ring or O-ring contact surfaces become
damaged. The O-ring should be replaced every year to ensure proper seal. Only use official SeaLife
O-ring designed for the DC2000 (Item # SL74017). Replacement O-rings are available at your local
authorized SeaLife dealer, or online at www.sealifepartsdirect.com (USA Only).
Removing the O-ring
Important:
Do not use tools or sharp objects to remove the O-ring to avoid damaging the soft
silicone material.
1) Push the O-ring along its groove until it lifts. Do not use tools or sharp objects to remove the
O-ring to avoid damaging the soft silicone material.
