90
• Do not expose housing to direct sunlight for prolonged periods of time.
• Do not store housing in extreme high temperatures, such as the trunk of your car.
• Keep the housing unlatched when storing for more than 3 months.
Preparing the camera and housing for underwater use
Before your dive, follow these important steps to prepare the inner camera and housing for
underwater use.
Preparing the inner camera
1) Insert memory card into camera and fully charge the battery.
2) Clean the rubber seal (A) located inside the battery door using a slightly dampened lint-free
cotton cloth. Allow the seal to air dry for a minute and close the waterproof door on the camera.
3) Clean the camera lens using a clean, lint-free cotton cloth.
4) Remove the strap from the inner camera. The strap may interfere with the waterproof seal.
5) Set the mode dial to underwater mode
.
6) Push the menu button and select the appropriate underwater scene mode. See page 43 for
information about setting the correct underwater scene mode.
