Page 41 of 44
P/N 595189-01 Rev A 4/10
reSPirATor mArKingS
Do not alter or permanently cover over any labels on the Scott SKA-
PAK SCBA or Scott SKA-PAK SCBA cylinder and valve assembly. If
user applied identification markings are added to the Scott SKA-PAK
SCBA or SCBA cylinder and valve assembly, do not obscure any la-
bels supplied on the SKA-PAK SCBA or SKA-PAK SCBA cylinder and
valve assembly. Any user applied markings must be applied in such a
way as will not weaken or damage the SKA-PAK SCBA or SKA-PAK
SCBA cylinder and valve assembly, will not interfere with the proper
function of these assemblies and will not add flammable materials to
these assemblies.
Periodic TeSTing
SCOTT recommends that this respirator be checked, both visually and
functionally, by a SCOTT Authorized Service Center using SCOTT
Authorized Test Equipment at least every two years
16
. However, heavy
use may require more frequent testing. This recommendation is in
addition to all other cleaning and maintenance procedures. A manual
covering the maintenance of this respirator is available on request
from SCOTT Health and Safety.
WArning
do noT APPly Any mArKingS or lAbelS
ThAT dAmAge or inTerfere WiTh The
oPerATion of The reSPirATor. Any uSer
APPlied mArKingS ThAT inTerfere WiTh
The oPerATion of The reSPirATor mAy
cAuSe A fAilure of The reSPirATor
And mAy reSulT in SeriouS inJury or
deATh.
WArning
APPlying Any mArKingS or lAbelS ThAT
dAmAge or obScure The exiSTing lA-
beling mAy void The APProvAl of The
cerTifying Agency by inTerfering WiTh
ProPer idenTificATion of ASSemblieS.
imProPer idenTificATion of ASSemblieS
mAy reSulT in errorS in mAinTenAnce
cAuSing fAilure of The reSPirATor Which
mAy reSulT in SeriouS inJury or deATh.
16
For respirators equipped with a breathing regulator with part number 200077-xx,
inspect the respirator at least once a year.
