SCHUNK RPE 100, Сборка и руководство по эксплуатации

Страница: 8 / 112

Basic safety notes
8 01/RPE/en/2011-08-04/SK-CW
2.2 Controlled production
The unit represents the state of the art and the recognized safety
rules at the time of delivery. However, it can present risks if, for
example:
•
The unit is not used in accordance with its intended purpose.
•
The unit is not installed or maintained properly.
•
The EC Machinery Directive, the VDE directives, the safety,
accident-prevention regulations and environmental protection
regulations valid at the usage site, or the safety and
installation notes are not observed.

The unit must only be used when in technically perfect
condition and in accordance with its designated use and the
instructions set out in the operating manual, and only by
safety-conscious persons who are fully aware of the risks
involved in operating the unit.

Immediately remedy faults that could impair safety.

In addition to this manual, statutory and other safety and
accident-prevention regulations and the standards and
guidelines valid at the usage site must be complied with.
2.2.1 Protective equipment
When the unit is in use, when in rotation and when it is stationary,
protective equipment must be used to catch flying parts should
the unit or part of the unit fail.
The protective equipment must comply with EC Machinery Direc-
tive requirements.
The machine/system manufacturer must ensure that the wall
thickness in the machine’s paneling is adequate and must not
use polycarbonate glass for protective windows, because this
may cause a threat to the life and limb of the operator if the com-
ponent should break.
2.2.2 Constructional changes, attachments, or modifications
Modifications, additions and conversions which could impair safety
may not be made to the unit without SCHUNK's permission.
Non-authorized modifications results in the exclusion from prod-
uct liability.