SCHUNK RPE 100, Сборка и руководство по эксплуатации

Страница: 62 / 112

Maintenance
FM 240 MuW Beta Type S Rev.01 2010-09-15
29
10 Maintenance
•
All installed ball bearings are sealed and maintenance-free.
•
Remove excessive dust and dirt from the cover band and other
components of the linear unit on a regular basis.
•
Relubricate the thread drives of the linear axes on a regular basis.
10.1 Lubrication
Influencing factors The following factors are key to determining the exact lubrication
intervals required:
•
Loading
•
Velocity
•
Motion
•
Operating temperature
•
Degree of dirtying
Short lubrication
intervals Short lubrication intervals are necessary:
•
where there is susceptibility to dust and damp;
•
under major loading;
•
when running at high velocity (up to V
max
);
•
when running over short travel distances.
Initial lubrication
E
Carry out an initial lubrication after starting up the unit for the first
time. A basic lubrication was applied at the factory.
Refer to the lubrication requirements set out in the following sections.