Installation
EN-US · 30.30.01.01610 · 00 · 01/20
23 / 50
6.3 Attaching the Parking Stands
Attach the parking stands to both ends of the main beam (8) according to the following instructions.
1. Unscrew the sealing caps (8.2) from the main
beam.
8.2
8
2. Push both sliding blocks (17.1) into the upper
slots of the main beam.
17.1
3. Screw the sealing cap back on tightly.
4. Ensure that the sealing cap is screwed on air-
tight.
5. Attach the handle (17.2) to the sliding block
(17.1) with four nuts.
17.2
6.4 Electrical Connection
DANGER
Electric shock from touching live components
Serious injury or death!
4
Make sure that the electrical components are not live before installation, maintenance
and troubleshooting.
4
Switch off the mains switch and secure against unauthorized restart.
