Operation
EN-US · 30.30.01.01610 · 00 · 01/20
33 / 50
3. Ensure that the handle is securely engaged.
17.2
7.7 Balancing the Center of Gravity (Optional)
The load hook can be attached to one of the suspension eyes (1). Different suspension eyes can be chosen
to adjust the balance of the lifting device for different loads.
1
4.1
WARNING
Uncontrolled swinging movements during lifting
Risk of serious injury
4
Always pick up the load at its center of gravity.
4
Lift the load in low gear.
4
Compensate for the swinging motion using the operator handle.
1. Hang the lifting device from one of the middle suspension eyes (1).
2. Apply suction to the load and lift it by a few centimeters.
3. Raise the lifting device and load slowly.
4. Depending on the inclination, securely set down the load again if necessary.
5. Hang the load hook from a different suspension eye.
6. Lift the load again.
