Operation
30 / 50
EN-US · 30.30.01.01610 · 00 · 01/20
2. Align the two outer cross beams (11) such that the suction plates are positioned in the center of the
outer areas.
ð
This ensures an even distribution of the load.
7.3.2 Correctly Aligning Four Cross Beams for Non-Rigid Loads
For non-rigid loads that are longer than the main beams (8), the cross beams (11) must be correctly
aligned to an imagined line of symmetry:
Incorrect alignment of the cross beams
11
8
=
=
=
8
Main beam
11
Cross beam
Correct alignment of the cross beams in four equal parts (1 to 4)
11
8
=
=
=
=
b
a
11
11 a
1
2
3
4
1. Position the two cross beams (11a) at the ends of the main beam (8).
2. Divide the load into four equal parts (1 to 4).
3. Arrange the inner cross beams (11b) such that the suction plates are at the same distance from the
imagined symmetry line.
ð
This ensures an even distribution of the load.
