Fundamental Safety Instructions
12 / 50
EN-US · 30.30.01.01610 · 00 · 01/20
2.10 Safety Features
The lifting device has the following safety features:
•
A vacuum gauge shows the current vacuum level in the vacuum distributor.
•
Audible warning device:
A warning tone sounds when the vacuum is between 0 bar and -0,6 bar.
•
A vacuum reservoir with non-return valve maintains the vacuum for a short period (depending on
the air impermeability of the load surface) in the event of a power failure.
•
Option: A water separator protects the vacuum generator from the ingress of water during wet pro-
cesses.
4
Before each start of operations, ensure that the safety features are in perfect condition (
(> See ch.
Inspecting Safety Features)
).
2.11 Technical Condition
If the product is operated while in a defective state, safety and function will be impaired.
•
Only operate the lifting device when in perfect working order as originally delivered.
•
Follow the maintenance schedule.
•
Use only original spare parts from Schmalz.
•
If the operating behavior changes, check the lifting device for faults. Rectify faults immediately!
•
Do not independently modify or alter the lifting device.
•
Safety features must not be disabled under any circumstances.
Schmalz assumes no liability for consequences of modifications over which it has no control.
2.12 Responsibility of the Operating Company
The operating company is also responsible for third parties in the working area of the lifting device. The
operating company must ensure that they have the appropriate qualifications and skills.
•
Ensure that regular breaks are taken.
•
Ensure that the lifting device cannot be started up by unauthorized persons.
•
During maintenance or repair work, ensure that the lifting device cannot be operated.
•
Clearly define the responsibilities for the various activities performed with the lifting device.
•
Ensure that these responsibilities are observed.
•
When handling unfamiliar loads, carry out tests where necessary to ensure safe operation:
– After switching off the power supply, the load is held for an additional five minutes (exception for
operation according to EN 13155).
– The load is sufficiently rigid that it cannot be damaged during handling.
2.13 Country-Specific Regulations for the Operating Company
•
Observe the country-specific regulations regarding accident prevention, safety testing and environ-
mental protection.
•
Do not use the lifting device until it has been ensured that the hoist (crane, chain hoist etc.) in which
it is installed complies with the country-specific regulations and safety provisions.
