sauter EQJW146F002, Руководство пользователя

Страница: 14 / 160

14 EQJW146F002 EN
Operation
The additional "meter" page is displayed with
connection status and further meter data for meters 1 to
3 in the "extended operating level" mode when the
meter bus is activated (see section 10.2.1). In addition,
the respective measuring and limit values are displayed
after confirming the plant scheme when the flow rate
and/or capacity limitation is active.
− The additional information is hidden when the key number
1999 is entered again.
− The key number 1999 cannot be used to change the con-
troller configuration and parameterization. A separate key
number exists for configuration and parameterization (see
section 3).
2.2.1 Adapting the Trend-Viewer
The standard graph shows the data measured at the outdoor sensor AF1 and flow sensor
VF1 plotted over time.
¼
Open the Trend-Viewer.
Adding measuring data
q
Select – – – – on the display.
¼
Activate editing mode for sensor selection.
q
Select sensor.
Note