Sanyo 85402843, Руководство по обслуживанию

Страница: 201 / 252

7 - 141
7
Mini ECO-i System
Remote Control Functions
9. LonWorks Interface Product Manual
(SHA-LN16UG(B))
3. Assigning Central Control Addresses
(1) Turn the power switch (S001) on the LonWorks Interface
power board to OFF.
(2) Turn the setting switch (S006-2) to OFF (so that central
control addresses are set with the DIP switches).
(3) Set the first central control address with the address switch
(S005). When assigning serial numbers, a consecutive series
of numbers is assigned for the central control addresses.
<Example> If the first central control address is “5,” then this
circuit board assigns central control addresses “5,”
“6,” “7,” and “8.”
(4) Make the enable/disable settings with the indoor unit enabling
switches (S004).
<Example> If central control addresses “6” and “8” do not exist,
enable only “5” and “7.”
(5) Turn the power switch (S001) on the LonWorks Interface
power board to ON.
x
Before assigning central control addresses for the
LonWorks Interface, use the remote controller to make
central control address settings for A/C units.
x
Follow only the steps for "Assigning Central Control
Addresses" when a system controller or other central
controller is already provided.
[Assigning Central Control Addresses]
OFF
1 2 3 4 5 6 7
OFF
1 2 3 4 5 6
OFF
1 2 3 4
“5” is set as the central control
address for indoor unit group 0,
and “7” is set as the central
control address for indoor unit
group 2.
S006
S005
S004
(1) Press and hold both the and buttons for 4 seconds
or longer.
Check that the "SETTING" display on the remote controller is
flashing.
(2) Set the "03" item code by pressing the and
temperature setting buttons.
(3) Set the desired central control address by pressing the
and timer buttons.
(4) Press the button, and check that the "SETTING" display
stops flashing and illuminates instead.
(The setting data cannot be changed unless the button is
pressed.)
(5) Press the button, and check that the display on the
remote controller has been cleared.
RCS-SH80UG
RCS-TM80BG
[Setting Central Control Addresses]
(2)
(4)
(5)
(3) (1)
(2)
(4)
(5)
(3) (1)
06-408 Mini_ECOi_SM7 11/10/06 7:24 PM Page 141
获取更多资料
微信搜索蓝领星球