Sanyo 85402843, Руководство по обслуживанию

Страница: 190 / 252

7 - 130
Mini ECO-i System
Remote Control Functions
7
8. Local Adaptor for ON/OFF
Controller (SHA-KL4UG(B))
OFF
Adapter address switch (S1)
The adapter address corresponds to the indoor unit number.
If multiple local adaptors are used, make sure each adapter has a unique
address.
(1) Setting the central control address from the central control unit
(Setting switch S2-3 OFF)
This mode is useful for systems with both local adaptors and indoor
units which are connected directly to indoor / outdoor operation lines,
and when the central control unit sets or changes central control
addresses.
When the local adapter address is set to 1, then the local
adapter unit number becomes 31-1.
In this case, the central control unit is free to set the local
adapter's central control address.
The local adapter address becomes the central control address.
Set the local adapter address as desired.
(2) Setting the central control address using the local adapter address
switches (Setting switch S2-3 ON)
If the local adapter address is set to 5, then the local adapter
unit number becomes 31-5, and its central control address
becomes 5.
Set the local adapter addresses, beginning with address 1.
The central control address is fixed by the adapter address switches.
(The central control address may not be changed by the central
control unit.)
Example:
Example:
Local adaptors are registered as system address 31, and the adapter
address and central control address will be the same.
Set the address so that it does not match that of any indoor unit central
control address.
How to Set the Adapter Address
ON OFF
Channel Channel Channel Channel
Adapter address
switch number
Adapter address
switch number
Adapter address
switch number
Adapter address
switch number
1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32 33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48 49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
ON
1 2 3 4 5 6
Local adaptors are registered as system address 31.
1
ON
OFF
2 3 4
S2
Setting Switches
All switches are OFF when
shipped from the factory.
Relay output (SET OUTPUT) operation answer-back coupling
control
OFF: No relay output
ON: Relay output is coupled with the answer-back input
(The output can be either pulsed or static, based on the
relay output setting.)
Set to ON when controlling equipment with remote control, such
as circulation fans with full heat exchanger.
Central control address setting switch
OFF: Set by central control unit
ON: Set by local adapter ADDRESS switches (S1)
Coupled answer-back switch
OFF: Do not use
ON: Use
Set to ON when not using coupled answer-back, such as when
controlling a heater.
Relay output switch (SET / RESET OUTPUT)
OFF: Pulse output
ON: Static output
06-408 Mini_ECOi_SM7 11/10/06 7:24 PM Page 130
获取更多资料
微信搜索蓝领星球