Sanyo 85402843, Руководство по обслуживанию

Страница: 183 / 252

7 - 123
Mini ECO-i System
Remote Control Functions
7
7. Communication Adaptor
(SHA-KA128AG(B))
(3) Setting the indoor/outdoor control wire connection on/off
1
Repeat steps
1
to
3
in section (2) “Adaptor number setting procedure” above. The following will display:
(1.Ano.03) (When the adaptor number is 3)
2
Press the
UP
key once so the following display appears:
(2.Adyu.0) (Factory setting)
3
Hold down the
SET
key for at least 1 second so the “0” part blinks, indicating that the setting can be changed. (The green and red monitor
LEDs are both on.)
Use the
UP
and
DOWN
keys to turn the indoor/outdoor control wire connection on or off as shown in the table below.
For example, to connect the indoor/outdoor control wire only to LINK1, press the
UP
key once. The following display will result:
(2.AdYu.1)
4
Press the
SET
key for at least 1 second to confirm. (Only the green monitor LED is on.)
(4) Other settings
With the display status showing as in number
3
in section (2) “Adaptor number setting procedure”, press the
UP
and
DOWN
keys to select
the setting items shown in the table below. Set as needed.
The setting procedure is the same as above.
(Press the
SET
key for at least 1 second, press the
UP
and
DOWN
keys to change, then press the
SET
key at least one second to confirm.)
Note
1
When configuring, do not set the same adaptor number more than once.
*
Use numbers between 1 and 7 for connecting to an Intelligent Controller.
2
Turn the indoor/outdoor control wire connection on/off as appropriate.
(Set to “Off” for LINKs with no connection.)
3
For connecting the indoor/outdoor control wire to only one link, use the
“LINK1” side.
Setting value Indoor/outdoor control wire connection
0 LINK1: On, LINK2: On (factory setting)
1 LINK1: On, LINK2: Off
2 LINK1: Off, LINK2: On
3 LINK1: Off, LINK2: Off
06-408 Mini_ECOi_SM7 11/10/06 7:24 PM Page 123
获取更多资料
微信搜索蓝领星球