INSTALLATION GUIDE
MODULAR SUNWAY TG
TE OD
Rev. 03
– 01/06/2018
137/
139
Permanent overload on the inputs without causing damage
-10
+10
V
Input filter cut-off frequency (low-pass first order filter)
1
Hz
Sampling period (depending on the application SW in use)
10
1000
ms
Table 60: Analogue inputs configured as temperature measurement with PT100
POWER SUPPLY OUTPUTS
Specifications of the analogue power supply outputs
Rating
Min
Typ
Max
Unit
Voltage available at te15 V (4) with respect to CMA
(6)
14.25
15
15.75
V
Voltage available at terminal -15 V (5) with respect to CMA (6)
-15.75
-15
-14.25
V
Maximum current which can be delivered from 15 V
and be absorbed by output -15 V
100
mA
Table 61: Specifications of the analogue power supply outputs
Specifications of the digital power supply outputs
Rating
Min
Typ
Max
Unit
Voltage available at ter24 V (44 + 49) with respect to
CMA (43 and 50)
21
24
27
V
Maximum current which can be delivered from 24 V
200
mA
Table 62: Specifications of the digital power supply outputs
WARNING
If the maximum/minimum input or output voltage ratings are exceeded, irreparable
damage to the equipment may occur.
NOTE
The isolated power supply output and the analogue auxiliary output are protected by a resettable
fuse capable of protecting the power supply unit inside the inverter against faults following a
short circuit, but it cannot be guaranteed that the inverter will temporarily cease operation in the
event of a short circuit.
