47
Figure 5-18 “Password input” box
Figure 5-16 “Other settings” interface
Figure 5-17 “Function settings” interface
2. In the right window selection area, press the "FUNCTION PARAMETER" button to enter the FUNCTION
PARAMETER window, and "PARAMETER SETUP" is set to "ENABLE", as shown in figure 5-17:
3. After the parameters setting are SET to enable, back to the other Settings window, the "USER LOGO
SELECTION" checkbox appeared "LOGO SET" button, click on this button, then pop-up password input box,
enter the password "082016", as shown in figure 5-18:
