English - 8
Microwave operation precautions
Failure to observe the following safety precautions may result in harmful
exposure to microwave energy.
•
Do not operate the oven with the door open. Do not tamper with the
safety interlocks (door latches). Do not insert anything into the safety
interlock holes.
•
Do not place any object between the oven door and front face or allow
food or cleaner residue to accumulate on sealing surfaces. Keep the
door and door sealing surfaces clean by wiping with a damp cloth and
then with a soft, dry cloth after each use.
•
Do not operate the oven if it is damaged. Only operate after it has been
repaired by a qualified technician.
Important
: the oven door must close properly. The door must not be
bent; the door hinges must not be broken or loose; the door seals and
sealing surfaces must not be damaged.
•
All adjustments or repairs must be done by a qualified technician.
Limited warranty
Samsung will charge a repair fee for replacing an accessory or repairing a
cosmetic defect if the damage to the unit or accessory was caused by the
customer. Items this stipulation covers include:
•
Door, handles, out-panel, or control panel that are dented, scratched, or
broken.
•
A broken or missing tray, guide roller, coupler, or wire rack.
Use this oven only for its intended purpose as described in this instruction
manual. Warnings and Important Safety Instructions in this manual do
not cover all possible conditions and situations that may occur. It is your
responsibility to use common sense, caution, and care when installing,
maintaining, and operating your oven.
Because these following operating instructions cover various models,
the characteristics of your microwave oven may differ slightly from those
described in this manual and not all warning signs may be applicable. If you
have any questions or concerns, contact a local Samsung service centre or
find help and information online at www.samsung.com.
Use this oven for heating food only. It is intended for domestic use only. Do
not heat any type of textiles or cushions filled with grains. The manufacturer
cannot be held liable for damage caused by improper or incorrect use of
the oven.
To avoid deterioration of the oven surface and hazardous situations, always
keep the oven clean and well maintained.
Product group definition
This product is a Group 2 Class B ISM equipment. The definition of group
2 which contains all ISM equipment in which radio-frequency energy is
intentionally generated and/or used in the form of electromagnetic radiation
for the treatment of material, and EDM and arc welding equipment.
For Class B equipment is equipment suitable for use in domestic
establishments and in establishments directly connected to a low voltage
power supply network which supplies buildings used for domestic
purposes.
MG23F301TAK_OL_DE68-04178G-05_EN.indd 8
MG23F301TAK_OL_DE68-04178G-05_EN.indd 8
6/7/2022 1:46:52 PM
6/7/2022 1:46:52 PM