English - 15
03
O
VEN USE
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “:0”,
“88:88” or “12:00” is automatically displayed on the display.
Please set the current time. The time can be displayed in either the 24-hour
or 12-hour notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
Auto energy saving function
If you do not select any function when appliance is in the middle of
setting or operating with temporary stop condition, function is canceled
and clock will be displayed after 25 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.
1.
To display the time in the...
24-hour notation.
12-hour notation.
Press the
Clock
(
) button once or twice.
2.
Set the hour with the
h
button and the minutes with
the
min
button.
3.
When the right time is displayed, press the
Clock
(
) button again to start the clock.
Result :
The time is displayed whenever you are
not using the microwave oven.
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven unattended.
First, place the food in the centre of the turntable. Then, close the door.
1.
Press the
Microwave
(
) button.
Result :
The 800 W (maximum cooking power)
indications are displayed:
Select the appropriate power level
by pressing the
Microwave
(
) button again until the
corresponding wattage is displayed. Refer to the power
level table on the next page.
2.
Set the cooking time by pressing the
10 min
,
1 min
and
10 s
button.
3.
Press the
Start
(
) button.
Result :
The oven light comes on and the
turntable starts rotating.
1) Cooking starts and when it has
finished the oven beeps four times.
2) The end reminder signal will beep 3 times (once every
minute).
3) The current time is displayed again.
Never
switch the microwave oven on when it is empty.
GE83MDT_XST_DE68-04111E_EN.indd 15
2013-09-05 �� 2:36:33
