Samson FOUNDATION 3730-5 Скачать руководство пользователя страница 92

Страница: 92 / 128

KH 8384-5 EN

Parameter lists

AI FB:

ALERT_KEY (4)

Read/write capability r/w; supported modes ALL

ID number of the plant section

• 1 to 255, [0]

Used by the fieldbus host system to sort alarms and events.

Note:

'0' is not permissible and will be rejected when transferring data to the device (error

alarm).

AI FB:

BLOCK_ALM (21)

Read capability r
Current block state with details on all configuration, hardware or system problems in the

block including date and time stamp.

AI FB:

BLOCK_ERR (6)

Read capability r
Active block error for AI Function Block

•

OUT OF SERVICE

•

CONFIGURATION_ERROR

AI FB:

CHANNEL (15)

Storage class S; read/write capability r/w; supported modes O
Assignment of the output of AI Function Block and the logical hardware channels

(Transducer Block).

• [2]

Note:

Set CHANNEL to 2 to start up the AI Function Block. This allows it to be assigned to

AI TRD.

AI FB:

FIELD_VAL (19)

Read capability r
Measured value of the Transducer Block in the PV_SCALE unit

AI FB:

GRANT_DENY (12)

· This parameter is not supported.

AI FB:

HI_ALM (34)

Read capability r
Alarm for the high pre-alarm limit (HI_LIM) including details on the date and time as well

as the value at which the alarm is triggered.

•

Unit of PV_SCALE

Содержание FOUNDATION 3730-5

































































































































Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы:

Samson FOUNDATION 3730-5, Руководство по настройке, Страница: 92 / 128

Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы: