manualshive.com logo in svg

Samson FOUNDATION 3730-5, Руководство по настройке, Страница: 84 / 128

Поделиться
Скачать
Samson FOUNDATION 3730-5 Скачать руководство пользователя страница 84

 84  

KH 8384-5 EN

Parameter lists

AO FB:

CHANNEL (22)

Storage class S; read/write capability r/w; supported modes O

Assignment of the output of AO 

Function Block

 and the logical hardware channels 

(Transducer Block).

•  [3]

Note:

 Set CHANNEL to 3 to start up the AO Function Block. This allows it to be assigned to 

AO TRD.

AO FB:

FSTATE_TIME (23)

Storage class S; read/write capability r/w; supported modes ALL

Fault state time [s]
Time between an error in the set point valid for the AO 

Function Block

 in the current 

operating mode is detected and failure action is triggered.

•  [0]

Note:

 Failure action is triggered if the error persists after this time has elapsed. The fault 

state of the AO Function Block is determined in the IO_OPTS parameter of this block.

AO FB:

FSTATE_VAL (24)

Storage class S; read/write capability r/w; supported modes ALL
Fault state value for the AO Function Block when failure action is triggered.

• 

Value and range from PV_SCALE ±10 %, [0]

Note:

 The value is used if the FAULT STATE TO VALUE option is selected in the IO_OPTS 

parameter.

AO FB:

GRANT_DENY (13)

 · This parameter is not supported.

AO FB:

IO_OPTS (14)

Storage class S; read/write capability r/w; supported modes O
Selects the input/output behavior of the AO Function Block.

• 

SP-PV TRACK IN MAN · SP tracks PV in MAN mode (Actual Mode)

• 

SP-PV TRACK IN LO · SP tracks PV in LO mode (Actual Mode)

• 

SP TRACK RETAINED TARGET · SP tracks RCAS_IN or CAS_IN depending on the preset 

target mode in LO or MAN mode (actual mode). This option has priority over SP-PV 

TRACK IN MAN/LO.

• 

INCREASE TO CLOSE · Inverts the output value to the Transducer Block (corresponds to 

the direction of action)

Содержание FOUNDATION 3730-5

































































































































Отзывы:

Нет отзывов