Samson FOUNDATION 3730-5 Скачать руководство пользователя страница 105

Страница: 105 / 128

KH 8384-5 EN

105

Parameter lists

PID FB:

HI_PRI (50)

Storage class S; read/write capability r/w; supported modes ALL
Behavior upon exceeding the high pre-alarm limit HI_LIM

•

[0] · The violation of the high pre-alarm limit is not analyzed.

•

1 · No notification upon violation of the high pre-alarm limit

•

2 · Reserved for block alarms

•

3 to 7 · The violation of the high pre-alarm limit is issued to notify the operator with the

corresponding priority: (3 = low, 7 = high)

•

8 to 15 · The violation of the high pre-alarm limit is issued as a critical alarm with the

corresponding priority: (8 = low, 15 = high)

PID FB:

IN (15)

Storage class N; read/write capability r/w; supported modes ALL

Analog controlled variable x (value and status)

PID FB:

LO_ALM (62)

Storage class D; read capability r
Alarm for the low pre-alarm limit (LO_LIM) including details on the date and time as well

as the value at which the alarm is triggered.

•

Unit of PV_SCALE

PID FB:

LO_LIM (53)

Storage class S; read/write capability r/w
Alarm limit for the low pre-alarm LO_ALM

•

Range and unit of PV_SCALE, [–3402823466 x 10

]

If PV falls below this limit, the alarm state parameter LO_ALM is issued.

PID FB:

LO_LO_ALM (63)

Storage class D; read capability r
Alarm for the low-low alarm limit (LO_LO_LIM) including details on the date and time as

well as the value at which the alarm is triggered.

•

Unit of PV_SCALE

Note:

Additionally, the active alarm can be confirmed manually in this parameter group.

PID FB:

LO_LO_LIM (55)

Storage class S; read/write capability r/w; supported modes ALL
Alarm limit for the low-low alarm LO_LO_ALM

•

Range and unit of PV_SCALE, [–3402823466 x 10

]

If PV falls below this limit, the alarm state parameter LO_LO_ALM is issued.

Содержание FOUNDATION 3730-5

































































































































Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы:

Samson FOUNDATION 3730-5, Руководство по настройке, Страница: 105 / 128

Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы: