manualshive.com logo in svg

Samson FOUNDATION 3730-5, Руководство по настройке, Страница: 77 / 128

Поделиться
Скачать
Samson FOUNDATION 3730-5 Скачать руководство пользователя страница 77

KH 8384-5 EN 

 77 

Parameter lists

AO TRD: XD_FSTATE_VAL_D (53)

Storage class S; read/write capability r/w; supported modes O/M/A
Discrete fault state value to which the valve moves when the AO Transducer Block is in the 

O/S mode and the action on fault detection has been selected in the XD_OOS_OPTS 

parameter.

• 

[0], 10 - 0 %1 - 100 %

AO TRD: XD_OOS_OPT (54)

Storage class S; read/write capability r/w; supported modes O/M/A
Action when the AO Transducer Block is in the O/S mode

•  [Hold last value]
•  Fail-safe position
• 

Fault state value (XD_FSTATE_VAL)

AO TRD: Y_HYST_MIN_TIME_DISTANCE (160)

Storage class S; read/write capability r/w; supported modes O/M/A

Statistical information > Drive signal diagram > Hysteresis
Time until test (d5) is repeated
• 0 to 24 h, [1 h]

AO TRD: Y_HYST_TESTINFO (162)

Storage class D; read capability r

Statistical information > Drive signal diagram hysteresis (d5 test): test status

AO TRD: Y_HYST_TEST_INFO (186)

Storage class D; read capability r

Tests > Drive signal diagram hysteresis (d2 test): test status

AO TRD: Y_HYST_TEST_PROGRESS (187)

Storage class D; read capability r
Tests > Drive signal diagram hysteresis (d2 test): progress of test in %

AO TRD: Y_HYST_TEST_TIME_STAMP (185)

Storage class D; read capability r

Tests > Drive signal diagram hysteresis (d2 test): time stamp for reference value recording

AO TRD: Y_HYST_TOLERANCE_BAND (161)

Storage class D; read/write capability r/w; supported modes O/M/A

Statistical information > Drive signal diagram > Hysteresis
Tolerance band of test (d5) (the test is canceled when the value leaves the tolerance band)

Содержание FOUNDATION 3730-5

































































































































Отзывы:

Нет отзывов