Samson FOUNDATION 3730-5 Скачать руководство пользователя страница 40

Страница: 40 / 128

KH 8384-5 EN

Parameter lists

RES:

STRATEGY (3)

Storage class S; read/write capability r/w; supported modes O/A

Permits strategic grouping and thus faster processing of blocks

• [0]

Blocks are grouped by entering the same number in the STRATEGY parameter of each block.

Note:

These data are neither checked nor processed by the Resource Block.

RES:

ST_REV (1)

Storage class N; read capability r

Static revision number

Note:

The revision number is incremented with each change of a static parameter in the

block.

RES:

TAG_DESC (2)

Storage class S; read/write capability r/w; supported modes O/A
User-specific text for unique identification and assignment of the block

• Max. 32 characters, [no text]

RES:

TEST_RW (8)

Storage class D; read/write capability r/w; supported modes O/A

This parameter is required for conformity tests only and is not relevant for normal operation.

RES:

TEXT_INPUT_1 (72) to TEXT_INPUT_5 (76)

Storage class N; read/write capability r/w; supported modes O/A

Any text

• Max. 32 characters, [no text]

RES:

UPDATE_EVT (35)

Storage class D; read capability r

Indicates whether static data have been changed, including date and time stamp

RES:

WRITE_ALM (40)

Storage class D; read/write capability r/w; supported modes O/A

Status of write protection alarm

Note:

The alarm is triggered when write protection is deactivated.

Содержание FOUNDATION 3730-5

































































































































Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы:

Samson FOUNDATION 3730-5, Руководство по настройке, Страница: 40 / 128

Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы: