Samson FOUNDATION 3730-5 Скачать руководство пользователя страница 107

Страница: 107 / 128

KH 8384-5 EN

107

Parameter lists

PID FB:

MODE_BLK (5)

Storage class S; read/write capability r/w; supported modes ALL

Operating mode

– Target Mode



Code 48 P0

– Actual Mode (read only)



Code 48 P1

– Permitted Mode

– Normal Mode (read only)
•

O/S · The PID algorithm of the block is not executed. The last value or the determined

value during an active fault processing is issued at the OUT parameter.

•

MAN · The output value of the function block can be entered manually by the operator

over the OUT parameter.

•

AUTO · The set point entered by the operator is used over the SP parameter upon

execution of the PID Function Block.

•

CAS · The PID Function Block receives the set point directly from an upstream function

block over the CAS_IN parameter for internal calculation of the out value. The PID

Function Block is implemented.

•

RCAS · The PID Function Block receives the set point directly from the fieldbus host

system over the RCAS_IN parameter for internal calculation of the out value. The PID

Function Block is implemented.

•

ROUT · The PID Function Block receives the out value directly from the fieldbus host

system over the ROUT_IN parameter. The out value is issued again over the OUT

parameter without the internal PID algorithm being executed.

PID FB:

OUT (9)

Storage class S; read/write capability r/w; supported modes O/M
Out value of the PID Function Block (value, limit and status)



Code 48 P6/7

•

Range OUT_SCALE ±10 %, unit of XD_SCALE

Note:

The OUT value can be entered manually when the MAN mode is selected in the

MODE_BLK parameter.

PID FB:

OUT_HI_LIM (28)

Storage class S; read/write capability r/w; supported modes ALL
Upper limit for analog OUT value

•

Range OUT_SCALE ±10 %, unit of OUT_SCALE, [100]

PID FB:

OUT_LO_LIM (29)

Storage class S; read/write capability r/w; supported modes ALL
Lower limit for analog OUT value

•

Range OUT_SCALE ±10 %, unit of OUT_SCALE, [0]

Содержание FOUNDATION 3730-5

































































































































Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы:

Samson FOUNDATION 3730-5, Руководство по настройке, Страница: 107 / 128

Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы: