Samson FOUNDATION 3730-5 Скачать руководство пользователя страница 110

Страница: 110 / 128

110

KH 8384-5 EN

Parameter lists

•

SHED TO AUTO_NORMAL RETURN · On failure of remote connection, change to AUTO

mode until RCAS or ROUT mode is restored.

•

SHED TO AUTO_NO RETURN · On failure of remote connection, change to AUTO

mode. No attempt is made to restore the mode and the block remains in AUTO mode.

•

SHED TO MANUAL_NORMAL RETURN · On failure of remote connection, change to

MAN mode until RCAS or ROUT mode is restored.

•

SHED TO MANUAL_NO RETURN · On failure of remote connection, change to MAN

mode. No attempt is made to restore the mode and the block remains in MAN mode.

•

SHED TO RETAINED TARGET_ NORMAL RETURN · On failure of remote connection, the

block attempts to attain the retained target mode until RCAS or ROUT mode is restored.

•

SHED TO RETAINED TARGET_NO RETURN · On failure of remote connection, the block

sets the target mode to the retained target mode.

Note:

This parameter is only active in RCAS and ROUT modes in the PID Function Block. If

the value is set to UNINITIALIZED, the PID Function Block cannot be placed in the RCAS or

ROUT mode.

PID FB:

SP (8)

Storage class N; read/write capability r/w; supported modes O/M/A
Set point w in AUTO mode (value and status)



Code 48 P4/5

•

Value and range from PV_SCALE ±10 %

PID FB:

SP_HI_LIM (21)

Storage class S; read/write capability r/w; supported modes ALL
Upper set point limit

•

Value and range from PV_SCALE ±10 %, [100]

Note:

Adapt this value accordingly if the end-of-scale value in the PV_SCALE parameter is

changed.

PID FB:

SP_LO_LIM (22)

Storage class S; read/write capability r/w; supported modes ALL

Lower set point limit

•

Value and range from PV_SCALE ±10 %, [0]

Note:

Adapt this value accordingly if the end-of-scale value in the PV_SCALE parameter is

changed.

Содержание FOUNDATION 3730-5

































































































































Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы:

Samson FOUNDATION 3730-5, Руководство по настройке, Страница: 110 / 128

Результаты поиска

Содержание FOUNDATION 3730-5

Отзывы: