en
41 / 108
1.6
Documenting the type plate data
Please write the type plate data on the following lines prior to installing the device. Please state this data
when ordering a service for the appliance. This will expedite the response to your question.
Type:
Year of manufacture:
Machine-no.:
2.
Safety instructions
Use
Wear work clothing and shoes that are specifically designed for working on deep fat fryers when using
the appliance.
The appliance is only to be transported
−
while it is cooled off.
−
the frying-oil or frying-grease has been drained,
−
and if the container below is emptied.
Do not use the appliance as a storage or work surface.
The user alone is responsible for damage caused by use contrary to the intended use.
Immediately disconnect the power supply if smoke is produced by the hot fat. Observe the notes on
page 66 in Chapter 10.3 “Recognising and fixing deep frying faults” and on page 69 in Chapter 13.
“Troubleshooting”!
Please observe the stipulations and rules of the professional associations!
Pump option: Manual switching on and off of the pump, therefore supervise the pumping process and
switch off the pump when the filling level in the bowl has been reached. Important, there is no auto
matic switching off when the bowl is overfilled!
If you cannot remedy malfunctions with the help of page 69 section 13. ”faults and remedies”, switch off
the appliance and notify customer service.
Risk of injury
During operation, there is a risk of burns from
−
hot frying-oil/frying-grease
−
hot fat splashes and
−
hot surfaces.
Careful when pulling out, sliding in or lifting out the filled container! The container must only be re
moved if the frying-oil/frying-grease has cooled down sufficiently. Use appropriate care to avoid hot
frying-oil/frying-grease from spilling over and splattering!
Observe the following with dual-bowl-deep fat fryers! When the container must be emptied or refilled by
hand, allow only the content from one bowl to drain into the container!
If the contents of both bowls are drained into the container, the container will become too heavy to lift
manually!
Pump option: While the pump is running, the cap may not be unlocked nor the intake bowle and the
drain hose inserted into the cap.
Pump option: No cleaning solution or water may be pumped with the pump! Residual water may other
wise remain in the pump and the drain hose! During operation, this may cause heavy splattering, foam
ing and overflowing of the bowl and to grease explosions!
