en
44 / 108
4.2
Control panel without "time control"
Please see page 48, Chapter 6.1 „Switching the appliance on“ and Chapter 6.2
„Selecting, changing and displaying the temperatures“ for information on how to operate the control unit!
"On/off" key
- For switching on/off, hold it down
for 3 seconds.
"P" key in combination with other keys
- Temperature selection (keys 1, 2, 3
and 4)
- Changing the stored temperature
"Up" key
Display
- Parameter number
The indicator light glows when
the pump is switched on
(option).
"Temperature/pump" key
(pump option)
- Querying the actual temperature when the appliance is switched on.
- Switch pump on/off, only if the appliance has been switched off at "on/off" key.
Display
- Setpoint or actual temperature.
- Error number
"Down" key
In increments of 1 or 5,
depending on the setting in
chapter 8.5
Dot is illuminated
when heating is on,
dot flashes
during the heating-up process if
the actual temperature is by
more than 10
°
C lower than the
setpoint temperature.
Wait until the dot has gone out
before starting with the frying
process.
Keys "1, 2, 3 and 4" temperature
- Selecting the temperature
4.3
Control panel with "time control"
Operating mode "Time and temperature" or operating mode "Product key"
4.3.1
Selection of the modes for "time control" option
Appliances equipped with a "Timer" can be operated in two different modes: In "Time and temperature" or
"Product keys" mode.
Appliances with a "Timer" are always set to "Time and temperature" mode before delivery.
For changing the modes, see page 60, chapter 8.5
Operating mode „Time and temperature“
In "Time and temperature" mode, the time and set
point temperature are always displayed during opera
tion.
There also four buttons for saving different, freely
selectable temperatures and cooking times. These
can be accessed at any time for quick and easy op
eration.
For description of the control panel see page 45
chapter 4.3.2
Operating mode ”Product keys”
In the "product keys" mode, the time and the number
of the selected product key are displayed,
e. g. "P22".
Only one "product key" can be selected each time.
Successive combination is not possible.
For description of the control panel see page 45
chapter 4.3.3
E.g.
Operating mode „Time and temperature“
E.g.
Operating mode ”Product keys”:
