en
60 / 108
8.5
Changing control default settings
8.5.1
Setting the parameters
Depending on the equipment of the appliance, different setting options are possible for the control, see
parameter table below, chapter 8.5.2
The setting mode is switched off automatically if the "P"
key or the "up"
or "down"
key are not
pressed within 10 seconds. Any settings made that were not confirmed by pressing the "P" key are not
stored.
Changing the setting
The appliance must be
switched on
.
First, press and hold down the "P"
key, then press the "Temperature/pump"
key - hold both
simultaneously for 3 seconds.
The parameter set last will be displayed.
Within 10 seconds, keep pressing the "up"
or "down"
key until the desired parameter is dis
played.
Within 10 seconds, press the "P"
key.
The value of the parameter flashes.
Within 10 seconds, keep pressing the "up"
or "down"
key until the desired value has been set.
Storing the set value - within 10 seconds, press the "P"
key.
Exiting the setting process
Wait for 10 seconds - the "setting the parameters" function is switched off.
Or:
First, press and hold down the "P"
, then briefly press the "temperature/pump"
key at the same
time.
8.5.2
Parameter table
(display only for time control option)
Param
eters
Factory set
ting
Setting range
Description
Customer
setting
P01
0
0=Off
1-99 hours
Time setting for the utilization period of the cook
ing oil or cooking fat. To assure an immediate ef
fectiveness of the changed setting, the short time
clock has to be reset, refer to page 58, chapter
P02
1
0=off, 1=on
Switching the acoustic signal and key sound on or
off
P03
10 seconds
0-60 seconds
Switching acoustic signal off (0) and setting length
of the acoustic signal (1-60 seconds)
P04
0
0=off, 1=on
Switching the standby function on or off
P05
30 minutes
10-120 minutes
Starting the standby function after x minutes
P06
90
°
C
60-170
°
C
Standby temperature in bowl
P07
0
0=1
°
C, 1=5
°
C
Temperature adjustment in increments each time
key is pressed
P08
1
0=off, 1=on
Switching the cooking time correction on or off
P09
0
0=off, 1=on
Switching the "product keys" mode on or off
“Timer“ option functions
