STB8827
Series Operation Manual
Chapter 2 Introduction
2.4.2
9
[SETUP]
When the LCR function is active, press this key
-[SETUP]
, the following soft keys
will be displayed in the soft key zone on the LCR measurement setup page.
<MEAS SETUP>
<CORRECTION>
<LIMIT TABLE>
<LIST SETUP>
<FILE MANAGE>
2.4.3 [SYSTEM]
This key
-[SYSTEM]
is used to enter into the system setup page. The following
soft keys will be available:
<SYSTEM SETUP>
<LAN SETUP>
2.5 Basic Operation
Basic operation of
STB8827
is as follows:
Use menu keys ([MEAS], [SETUP], [SYSTEM]) and soft keys to select the
desired page.
Use cursor keys ([
←
][
→
] [
↑
] [
↓
]) to move the cursor to the desired zone.
When the cursor moves to a specified zone, the zone will become reverse
expression.
The soft key functions corresponding to the current zone of the cursor will be
displayed in the soft key zone. Users can select and use the desired key.
Numeric keys, [
←
] and [ENTER] are used to input data.
When a numeric key is pressed down, the usable unit soft key will be
displayed in the soft key zone. You can choose a unit soft key or press [ENTER]
to end data inputting. When [ENTER] is used to terminate data inputting, the
unit of data will be set to a default unit, such as Hz, V or A. For example, the
default unit for frequency is Hz.
2.6 Start the instrument
Plug in 3-line power plug.
Caution: Keep the power-supply voltage and frequency conform to above
specifications. Power input phase line L, zero line N, ground line E should be the
same as that of the instrument.
Press the power switch at the left corner on the front panel and then a boot screen
will appear which displays our company logo, instrument model (
STB8827
A),
and
