STB8827
Series Operation Manual Chapter 2 Introduction
5
ESCAPE key.
8) [
←
]
BACKSPACE key is used delete the last numeric of the input value.
9) PASS indicator
LED indicator shows the test result has passed.
10) FAIL indicator
LED indicator shows the test result has failed.
11) [RESET]
Press this key, other operation cannot be executed on other pages.
12) [TRIGGER]
When the trigger mode is set to MAN mode, press this key to trigger the
instrument.
13) [ENTER]
This key is used to end the input of data, and confirm and save the data
displayed on the inputting line (the bottom line on LCD).
14) Test terminals (UNKNOWN)
4-teminal test pair is used to connect 4-terminal test fixture or cable to
measure DUT.
The 4 terminals are respectively as follows: Hcur, Hpot, Lpot and Lcur.
15) Ground terminal
The ground terminal is connected with the case of instrument, which can be
used to protect or shield the ground connection.
16) CURSOR
This key is used to move the cursor on the LCD displayed page. When the
cursor moves to a zone, the corresponding zone will be lightened.
17) Soft keys
Six soft keys are used to select parameters. The corresponding function of
each soft key has been displayed on its left (the right part of LCD). The
function definition varies with different pages.
18) LOG
This key can record the measurement data automatically after inserting the
U-disk on the MEAS interface.
