Saluki S5105 Series, Руководство пользователя

Страница: 8 / 204

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
2

Two types of USB2.0 ports available for portable storage device connection and PC
communication respectively;

One 10/100Mbps network port for local network establishment and remote control.
2 Typical Applications
2.1 Multiple-field test

Filter performance test
Test such indicators of the filter as insertion loss, ripple, and out-of-band suppression.

Time domain measurement
Test on cable length and failure positioning via cable and cable and antenna analyzer or time
domain function of the vector network analysis mode.

Radar and communication system performance test
Measure radar network scattering parameter.
It can be used for accurately testing the frequency, power, phase noise of various signals during
signal generation as well as various spurious signals, parasitic signals, harmonic distortion and
signal modulation characters during the R&D of various military and civilian radar systems and
communications systems.

Spectrum monitoring management
It can be used to manage the airborne radio frequency signal in the control range, and quickly
specify and search various interference signals. For example, it can monitor and manage the
spectrum in such places as the military radio stations, broadcasting stations, communications
equipment, airports, base stations and sensitive areas. Ii can also be used for radio monitoring
thanks to its audio demodulation function.

Communication satellite monitoring
It can be used for monitoring the signal spectrum quality, power and power control status of the
communication satellite and discriminating and searching interference signals, ensuring
security, reliability and stability of the communication satellite network.

RF identification (RFID) test
It can be used to test the transmitted stray radiation and field intensity of the interrogator,
frequency deviation and occupied bandwidth, and measure the polling and timing of the RF
identification system.

Bluetooth test
It can be used for testing the power, power spectrum, modulation of the transmitter and stray
radiation of the transceiver of the bluetooth system.
2.2 Test on components, parts and the whole instrument
It can be used for the DUT S-parameter amplitude, phase and group delay measurement, featuring
efficiency, strong error correction capability, which is widely used in such military and civilian fields as
components, radar, aerospace, electronic jamming and countermeasures, communications, radio and
television.
It can be used for testing such parameters as gain, frequency response, bandwidth, insertion loss,
frequency conversion loss, isolation and distortion of such components and parts as the cable, connector,
amplifier, filter, mixer, attenuator, isolator and coupler.
It can be used to test various instruments and equipment on such performance indicators as the
frequency, power, phase noise, parasitic, harmonic distortion and modulation characteristics during the
R&D, production and maintenance of the signal generator.