Saluki S5105 Series, Руководство пользователя

Страница: 65 / 204

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
59
[Ignore Iso]
Ignore isolation item.
[Pos Iso]
Measure positive isolation.
[Rev Iso]
Measure reverse isolation.
[Cal Cont>]
Complete the remaining calibration steps.
【
Measure
】
[S11]
Set the measurement parameter to S11.
[S21]
Set the measurement parameter to S21.
[S12]
Set the measurement parameter to S12.
[S22]
Set the measurement parameter to S22.
[Meas Format Log]
Select the measurement format, which is log amplitude by default.
[Log]
Set the measurement format to log amplitude.
[Linear]
Set the measurement format to linear amplitude.
[VSWR]
Set the measurement format to VSWR.
[Phase]
Set the measurement format to phase.
[Smith]
Set the measurement format to the impedance circle.
[Linear], [Log], [Re/Im], [R+JX], [G+JB]
Set the display format of marker information in Smith format.
[Polar]
Set the measurement format to polar.
[Group Delay]
Set the measurement format to group delay.
[Transform]
Set transform related parameters.
[Transform Off On]
Set transform to on or off state.
[Start Time]