Saluki S5105 Series, Руководство пользователя

Страница: 150 / 204

Tel: 886.909 602 109 Email: sales@salukitec.com
www.salukitec.com
144
[Bottom]
Set the maximum scale in the top position of the vertical part of the display grid within the range of
- 500 dB - + 499.9 dB.
[Auto Scale]
Display the trace in the scale most suitable for the screen, which is only valid in Cartesian coordinates.
[Default scale]
All options in the Cartesian coordinate format for the amplitude setting are the default values at power
on.
[Ref Value]
Set the reference level, which is only valid in Cartesian coordinates.
[Ref Pos]
Set the reference position, which is only valid in Cartesian coordinates.
[Scale]
Set the scale/div, which is only valid in Cartesian coordinates.
[Output Power high>]
Set the output power to high, low or manually set.
[High]
Set the output power to high.
[Low]
Set the output power to low.
[Man -18dBm]
Set output power manually
【
BW
】 【
BW
】
[Ave Off On]
Set the averaging to on or off state.
[Avg factor]
Set the average number of times, and the default is 16.
[Smooth Off On]
Set the curve smoothing function to on or off.
[Aperture (%) 10.00]
Set the smoothing percentage.
[IF BW]
Set the IF bandwidth of the current sweep.
[Sweep/Setup]
[Trig Type Cont Single]
Set the trigger type to continuous or single.
[Swp Once]
Trigger sweep once.
[Swp Time Auto Man]
Set the sweep time, and there are two modes: automatic and manual.
[Points 201]