109
Tel: 886.2.2175 2930 Email: [email protected]
Figure 6-25 Self Define Matching Circuit Embedding Dialog Box
6.7.3.2.
By front panel keys
1) Press
【
Analysis
】
in MKR/ANALYSIS area, and press corresponding soft-key of [Fixture Simu…] in the soft-key menu
that turns up.
2) Press corresponding soft-key of [Fixture Simu… on|OFF] to trigger the opening and closing of fixture simulator
function.
3) Press corresponding soft-key of [Port Matching] and press corresponding soft-key of [Port Matching on|OFF] in the
sub-menu that turns up to enable the matching circuit embedding function.
4) Press corresponding soft-key of [Select Port 1|2] to shift to corresponding port.
5) Press corresponding soft-key of [Select Circuit], choose proper circuit type on the sub-menu that turns up. When the
circuit type is “User”, you can choose the S2P file to be used in the dialog box that turns up and press corresponding
soft-key of [Back].
6) Press corresponding soft-key of [C(F)], [G(S)], [L(H)], [R(Ω)], and enter the value in corresponding editing box.
