Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Страница: 72 / 100

3 PERIODICAL MAINTENANCE
– 66 –
Interval Ref. No. Location Inspection and service Lubricant Q’ty
Every 10
service
hours or daily
⑤
Engine oil level gauge Check oil level, add as necessary Engine oil
1
⑯
Radiator : Reserve tank
Check coolant level, add as
necessary
Coolant
1
⑲
Fan belt Check tension, unusual wear and adjust 1
Every 50
service
hours
①
Hydraulic oil tank Check oil level, add as necessary Hydraulic oil
1
* ⑧
Blade cylinder head and
anchor pins
Apply grease Grease 2
* ⑳
Push rod anchor pins Apply grease
Grease 2
⑨
Battery
Check hydrometer, looseness of
terminals
1
⑪
Fuel sedimenter Check, drain water and dust 1
⑭
Brake Check, function and adjust
1
Every 250
service
hours
⑫
Rubber dampers Check for cracks
6
⑬
Vibrator Check oil level, add as necessary Gear oil 1
⑭
Brake links Apply grease Grease
2
Gear case : Wheel motor Check oil level, add as necessary Gear oil 1
Tilt pin Apply grease Grease 3
Steering cylinder Apply grease Grease
2
㉕
Final drive :
Differential case
Check oil level, add as necessary Gear oil 3
Every 500
service
hours
④
Engine oil filter Change filter element
1
⑦
Fuel filter Change filter element
2
⑪
Fuel sedimenter Change filter element 1
⑮
Control links
Check looseness, adjust as necessary
Apply grease
Grease
1
㉒
Line filter Change filter element
1
㉕
Final drive :
Differential case
Change gear oil Gear oil 3
㉖
Engine oil pan Change engine oil Engine oil
1
Every 1000
service
hours
②
Suction filter Clean filter element or change
1
③
Hydraulic oil tank Change hydraulic oil, clean inside Hydraulic oil
1
⑬
Vibrator Change gear oil Gear oil
1
Gear case : Wheel motor Change gear oil Gear oil
1
Every 1500
service hours
⑥
Engine oil separator Change filter element or clean
1
Every 3000
service hours
⑱
DPF Clean DPF 1
As
required
⑩
Tires : Wheel hub nut
Check condition, air pressure and
looeness
2
⑯
Radiator Clean fins and inside
1
⑰
Air cleaner Change filter element 1
㉗
Fuel tank Drain water and dirt
1
㉘
Gas damper
Check condition, change as
necessary
2
㉙
Electric bulbs Check bulbs
-
* : For SV204TB only
• Ensure the 10 hours maintenance and that there are no loose bolts, nuts and oil leaks before start the machine.
• No.22 : Change the hyd. filter when the monitor lamp comes on. even if it’s before every 500 hours.