Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Страница: 15 / 100

1 BASIC PRECAUTIONS FOR SAFETY
– 9 –
WARNING: Negligence of these instructions can lead to accidents.
■
Watch your distance
• When traveling on a road, bear in mind the
stopping distance. Avoid excessive speed,
and abrupt starting and stopping, and
moving in a zigzag direction.
■
Understand ROPS functions (with ROPS)
• Ensure that there is no loose bolt, crack nor rust on the bodies and the attaching portions,
of ROPS.
• Tighten bolts with the specified torques after ROPS are removed.
Tightening torque :
496 N∙m
• Do not weld nor drill holes to the ROPS parts without the permissions from SAKAI,
because it may decrease strengths of the ROPS.
• Be sure to wear the seatbelt during operation.
1.3 Before Starting the Engine
■
It is confirmed that hood and door is closed
• Please confirm hood and door has put it away in the confirmation before it gets on.
■
Adjust the operator’s seat to your most effective operating position
• Sit on the operator’s seat. Adjust the seat so that your back will make contact with the
seat back when the brake pedal is pressed down to the full extent. Check to be sure that
the brake pedal can be fully pressed down without difficulty when you twist your body for
reverse run.
• Adjust the seat to allow proper operation of the steering wheel, levers, switches, etc.
■
Secure good visibility (with ROPS-CAB)
• Keep the windowpanel clean.
• Lock the windows and doors no matter whether they are open or closed.
• Do not leave the doors half-closed.
■
Secure forward and backward visibilities
• Adjust the rear view mirrors and under mirrors for good visibility. If dirty, clean them. If
damaged, replace.