Sakai SV204 Series, Инструкция по эксплуатации и обслуживанию

Страница: 63 / 100

2 OPERATION
– 57 –
2.15 When the Battery Has Discharged
WARNING
• To check and handle the batteries, keep the
engine stopped with the starter switch in the
position.
• The batteries give off explosive gases. Do not
smoke close to the batteries. Keep flames and
sparks away from the batteries.
• The electrolyte is very corrosive and will harm
your clothing or skin. If the electrolyte has
come into contact with your clothing or skin,
flush with sufficient amount of water. In case
the electrolyte has gotten into your eyes, flush
with water and get medical help.
• To disconnect the battery cables, start with the
negative terminal (earth). When connecting,
start with the positive terminal. Do not allow
a metallic item to bridge between the positive
terminal and machine body. This can generate
sparks, causing an explosion.
• Loose battery terminals can cause sparks.
An explosion will result. When connecting the
terminals, make certain that they are tight.
CAUTION
The power-supply voltage of this machine is 12V.
2.15.1 Connection and disconnection of booster cables
When jump-starting the engine, connect the booster cables as follows:
■
Connection of booster cables
1) Connect one end of the positive booster cable
Ⓐ
to the
positive (+) terminal of the battery on the machine.
2) Connect the other end of the positive booster cable to
the positive (+) terminal of the booster supply.
3) Connect the negative booster cable
Ⓑ
to the negative
(–) terminal of the booster supply.
4) Connect the other end of the negative booster cable to
a good earth of the engine block of the machine.